#VCDS FOR AUDI INSTALL#
You will never need to enable the following unless you install the equipment. This is what the coding looks like on my A4 6MT with no issues and good results.īyte 8 Bit 0 Change 0 to 1 - Enable Engine/Gearbox (This bit will also enable S mode even when D is selected For Autos- This bit was determined to be optional)īyte 8 Bit 1 Change 0 to 1 - Enable Dynamic Steering (This bit enables steering response control)īyte 8 Bit 2 Change 0 to 1 - Enable Engine (Reported for better throttle response)īyte 8 Bit 4 Change 0 to 1 - Enable Steering (If equipped) It wont cause any issues to enable and try it.įor 6MT I would enable 0,1,2 and 4. Some people claim results from 4 and others don't. My recommendation is for Automatics to enable Bits 1,2 and 4. Most people with Automatic transmissions are skipping bit 0 because of the car always in S mode, but they are still reporting good results for the other changes. Don't waste your time enabling items you don't have it wont do you any good and could cause errors. Some are for cars with the actual ADS hardware such as Sports Differential. The following enables the specific items in the MMI Menu as well as activating the feature. Byte 7, bit 5, change 0 to 1 - (Tells the car Drive Select is installed) Long Coding must be done first to enable the ADS MMI menu and allows access to the adaptation coding:Ĭhoose the "Select Control Module " Option: If you install the switches you will get rid of the errors. This will not cause any errors on your dash. Since the car is looking for an ADS switch you will get a Charisma error when performing a scan. *Note that you will have an error after you complete this coding.
![vcds for audi vcds for audi](https://www.dognmonkey.com/audi/wp-content/uploads/y_vag5-1.jpg)
One solution for the non MMI cars is to install the buttons which will allow you to change the settings on the fly but will not allow you individual control of the separate systems. Of course the advantage of the MMI is that you can control the components when ever you want on an individual basis. Cars without need to make their individual setting directly in the adaptation coding of the control module.
![vcds for audi vcds for audi](https://i0.wp.com/nickscarblog.com/wp-content/uploads/2012/03/seatbelt-chime.png)
There are two stages to this, one is enabling the ADS and the second optional which is installing the ADS buttons.Ĭars with MMI can control individual setting through the MMI. Enable ADS and Default Settings - Installing ADS Buttons